HackRF notities
Inhoud
Laatste nieuws
Het laatste nieuws staat op https://www.kickstarter.com/projects/mossmann/hackrf-an-open-source-sdr-platform/posts en op: http://nine.pairlist.net/pipermail/hackrf-dev/
Opbouw
Schakelbare versterkers in RX en TX pad. Beiden MGA81563. Volgens datasheet:
- Gain: 12.5 ... 10.2dB gain.
- Pout(1db): 14.7 ... 15.1 dBm
- Pout(sat): 17 dBm
Volgens Mossman:
The maximum TX power varies by operating frequency:
30 MHz to 100 MHz: 5 dBm to 15 dBm, increasing as frequency decreases
100 MHz to 2300 MHz: 0 dBm to 10 dBm, increasing as frequency decreases
2300 MHz to 2700 MHz: 10 dBm to 15 dBm
2700 MHz to 4000 MHz: -5 dBm to 5 dBm, increasing as frequency decreases
4000 MHz to 6000 MHz: -15 dBm to 0 dBm, increasing as frequency decreases
Paden
TX Pad (0 ... 2.3 GHz)
- DAC
- MAX2837 IQ mixer (if=2.3 ... 2.7)
- RFFC5072 synth-mixer
- LPF
- optionele MGA-81563
TX Pad (2.3 ... 2.7 GHz)
- DAC
- MAX2837 IQ mixer (if=2.3 ... 2.7)
- optionele MGA-81563
TX Pad (2.7 ... 6.0 GHz)
- DAC
- MAX2837 IQ mixer (if=2.3 ... 2.7)
- RFFC5072 synth-mixer
- HPF
- optionele MGA-81563
RX Pad:
- optionele MGA-81563
- ?
- ADC
cpu
Dual-core Cortex-M4/M0, 168 kB SRAM, CAN, AES, SPIFI, SGPIO, SCT
Software
Zie ook : GnuRadio
windows
06 september: On Fri, Sep 5, 2014 at 4:24 PM, Karl Koscher <supersat@cs.washington.edu> wrote:
Until a better, more permanent solution is in place, I have a work around for those who can't wait: https://homes.cs.washington.edu/~supersat/hackrf-tools-cpld-update-hack.zip I've modified the firmware to use a Windows-compatible way to getting the HackRF into the CPLD programming mode, and made a corresponding change to libhackrf. To update the CPLD, you'll need to reflash the LPC43xx firmware, reset the HackRF, and then apply the CPLD update.
Datasheets
Zie: https://github.com/mossmann/hackrf/wiki/Hardware-Components
Te koop
De HackRF is te koop in pre-order, bij onder andere:
Niet duidelijk is of de hackrf nog te leveren zal zijn.
misc
HackRF One Technische info: https://github.com/mossmann/hackrf/tree/master/doc/hardware Hier is te vinden: schema's en onderdelen-opstelling.
Ook diverse software code in .zip formaat.
schema
Het HackRF One schema in .pdf formaat: (keuze > view raw)
https://github.com/mossmann/hackrf/blob/master/doc/hardware/hackrf-one-schematic.pdf
